Changing The Flash Mode; Auto; Off; Index - Canon POWERSHOT N2 User Manual

Changing the Flash Mode

You can change the flash mode to match the shooting scene. For details
on the flash range, see "Flash Range" ( = 134).
● If the flash fires, vignetting may occur.

Auto

Fires automatically in low-light conditions.
On
Fires for each shot.

Off

Prepare the camera for shooting without the flash as follows.
●
If a blinking [
halfway in camera-shake inducing, low-light conditions, mount the
camera on a tripod or take other measures to keep it still.
Downloaded From camera-usermanual.com Canon Manuals
Still Images Movies
1
Configure the settings.
●
Touch [ ] button, choose [ ] in
the menu, and choose the desired flash
mode ( = 27).
● The option you configured is now
displayed.
] icon is displayed when you press the shutter ring

Other Settings

Changing the IS Mode Settings

1
Access the setting screen.
●
Touch [
then touch [IS Settings] on the [
choose it ( = 28).
2
Configure the settings.
●
Choose [IS Mode], and then choose the
desired option ( = 28).
Optimal image stabilization for the shooting conditions
Continuous
is automatically applied (Intelligent IS) ( = 39).
Image stabilization is active only at the moment of
Shoot Only*
shooting.
Off Deactivates image stabilization.
* The setting is changed to [Continuous] for movie recording.
●
If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this
case, set [IS Mode] to [Off].
Before Use
Basic Guide
Advanced Guide
Still Images Movies
], touch [ ], and
] tab to

Index

1
Camera Basics
2
Creative Shot Mode
3
Auto Mode / Hybrid Auto
Mode
4
Other Shooting Modes
5
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
61