Canon PowerShot D20 User Manual page 145

• Images will not be assigned to a category if you switch to Shooting mode
or turn the camera off before finishing the setup process in step 4.
Selecting a Range
• You can clear the selection of all images in the [Select Range] category by
choosing [Deselect] in step 4.
Choose a category.
Press the op buttons to choose a category,
and then press the m button.
To cancel selection, press the m button
again. is no longer displayed.
Repeat this process to choose additional
images.
Finish the setup process.
Press the n button. A confirmation
message is displayed. Press the qr buttons
to choose [OK], and then press the m
button.
Choose [Select Range].
Following step 2 on p. 144, choose [Select
Range] and press the m button.
Choose images.
Follow steps 2 – 3 on p. 136 to specify
images.
Choose a category.
Press the p button to choose the type of
image, and then press the qr buttons to
choose a category.
Finish the setup process.
Press the p button to choose [Select], and
then press the m button.
Image Categories
is displayed.
145