Choosing Images Individually - Canon PowerShot D20 User Manual

Choosing Images Individually

• Images will not be protected if you switch to Shooting mode or turn
the camera off before finishing the setup process in step 3.
Choose [Select].
Following step 2 on p. 134, choose [Select]
and press the m button.
Choose an image.
Press the qr buttons to choose an image,
and then press the m button.
displayed.
To cancel protection, press the m button
again. is no longer displayed.
Repeat this process to specify other images.
Protect the image.
Press the n button. A confirmation
message is displayed.
Press the qr buttons to choose [OK], and
then press the m button.
Protecting Images
is
135