Specifications; Intent Of Use; Placing Tool Specification - Stanley ESAFOR MK II Instruction And Service Manual

O R I G I N A L I N S T R U C T I O N

2. SPECIFICATIONS

2.1 INTENT OF USE

The 74290 Tool is designed to convert round holes in to hexagonal holes. The latter are produced by means of a drill. Then
the tool, equipped with punch and reference die, is to be inserted into the hole, where it removes other material in order to
obtain a hexagon hole, ready to receive threaded hexserts.
In this way it is possible to easily and rapidly install threaded inserts which, owing to the hexagon profile, guarantee the on-
rotation of the joint, with evident advantages regarding the production process and the offered performances, compared to
round threaded inserts or other competitor technologies (nuts, welded nuts, etc...).
The use of this tool for threaded inserts enlarges the range of application (up to now it was restricted to the employment of
pre punched sheets) for box type design pieces, low volume series production and in situ applications.
For further details regarding the preparation of the hole in relation to the type of material and the thickness, see page 12.
DO NOT use under wet conditions or in the presence of flammable liquids or gases.

2.2 PLACING TOOL SPECIFICATION

Air Pressure
Free Air Volume Required
Stroke
Pull Force
Weight
Noise values determined according to noise test code ISO 15744 and ISO 3744.
A-weighted sound power level dB(A), L
A-weighted emission sound pressure level at the work station
dB(A), L
pA
C-weighted peak emission sound pressure level dB(C), L
Vibration values determined according to vibration test code ISO 20643 and ISO 5349
Vibration emission level, a
Minimum - Maximum
@ 5 bar/75 lbf/in2
Maximum
@ 5.5 bar/ 2400 kgf
Without nose equipment
WA
:
hd
Declared vibration emission values in accordance with EN 12096
5-7 bar (75-100 lbf/in2)
8 litres (0.28 ft3)
6.5 mm (0.256 in)
23.5 kN (5,290 lbf )
2.2 kg (4.85 lb)
Uncertainty noise: k
Uncertainty noise: k
, Uncertainty noise: k
pC peak
Uncertainty vibration: k = 0.94 m/s2
E N G L I S H
74290
= 3.0 dB(A) 89.4 dB(A)
WA
= 3.0 dB(A) 87.4 dB(A)
pA
= 3.0 dB(C) 89.8 dB(C)
pC
74290
2.36 m/s2
7