Engine Oil Change - APRILIA SXV 450 2008 Manual

Hide thumbs Also See for SXV 450 2008:
Table of Contents

Advertisement

Unscrew and remove the filler plug «2».
Top up the oil in the tank until you reach the correct level.
CAUTION
DO NOT ADD ADDITIVES OR ANY OTHER SUBSTANCES TO THE OIL. WHEN
USING A FUNNEL OR ANY OTHER ELEMENT, MAKE SURE IT IS PERFECTLY
CLEAN.
NOTE
USE GOOD QUALITY LUBRICANTS.

Engine oil change (04_03, 04_04, 04_05, 04_06)

Park the vehicle on firm and level ground.
Rest the vehicle on its stand.
04_03
Stop the engine and let it cool off so that the oil in the crankcase flows down
and cools as well.
Unscrew and take out the cap (1).
Place a container to collect the oil underneath the engine oil drainage plug
on the flywheel side.
Unscrew and remove the oil drainage plug (2) and then drain all the engine
oil .
Place a container to collect the oil underneath the engine oil drainage plug
of the recovery tank.
04_04
56

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sxv 550 2008

Table of Contents