Light Unit - APRILIA SXV 450 2008 Manual

Hide thumbs Also See for SXV 450 2008:
Table of Contents

Advertisement

8. Turn indicator warning light (green)
9. Overrevving warning light

Light unit

Turn indicator warning light
Flashes when the turning indication is activated
Engine control system warning light
It comes on when the ignition switch is set to ON and the engine has not been started,
thus performing the warning light activation test. If the warning light does not come on
at this stage, contact an Official aprilia Dealer.
CAUTION
IF THE ENGINE CONTROL LIGHT (4) STAYS ON AFTER START-UP OR COMES
ON DURING REGULAR ENGINE OPERATION, THIS MEANS THAT THERE IS A
FAULT IN THE START-UP/IGNITION SYSTEM. SHOULD THIS OCCUR, CONTACT
AN Official aprilia Dealer AS SOON AS POSSIBLE.
High-beam warning light
Comes on when the high beam light is activated or the high beam light is flashed.
Low fuel warning light
Comes on when 2.2 ± 1 l (4 ± 1.8 in) of fuel are left in the fuel tank.
20

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sxv 550 2008

Table of Contents