Checking the fuses is necessary whenever an electrical component fails to operate
or is malfunctioning or when the engine does not start.
Check the secondary fuses first and then the main 30A fuse.
To check:
•
Set the ignition switch to (OFF) to avoid an accidental short circuit.
•
Remove the right side fairing by undoing the two screws (1) and slide if off
from its seat.
04_25
•
Lift the cover (2) of the secondary fuse box.
04_26
•
Take out one fuse at a time and check whether the filament (3) is broken.
•
Before replacing the fuse, find and solve, if possible, the reason that caused
the problem.
•
If the fuse is damaged, replace it with one of the same amperage.
NOTE
IF THE SPARE FUSE IS USED, REPLACE WITH ONE OF THE SAME TYPE IN THE
CORRESPONDING FITTING.
78