APRILIA SXV 450 2008 Manual page 25

SETTING
•
Press MODE until the time digits blink;
•
Each time the MODE button is pressed, the time increases by one unit. Hold
down the button to increase time units automatically;
•
If you do not touch the control for two seconds, the hour is set and the clock
switches to minute setting;
02_12
Follow the same procedure to set minutes and seconds. Memorise the new values as
before by not pressing any keys for two seconds. If miles are the unit measure, the
AM and PM indications will start to blink alternatively after the setting operation has
been completed. When you press MODE to select the correct indication, this is linked
to current time and it changes automatically when the clock goes from 12:59:59 to 13.
RPM INDICATOR
From the TIME display it is possible to access the LAP TIMER configuration by press-
ing briefly on the SCROLL button. The value is shown in the B area and is also
indicated graphically with a bar in the C area of the display.
02_13
25