CAUTION
WAIT FOR THE ENGINE TO COOL DOWN BEFORE CHECKING OR TOPPING-
UP THE COOLANT LEVEL.
•
Stop the engine and wait for it to cool down.
•
Place the vehicle on firm and level ground.
•
Keep the vehicle upright, with both wheels on the ground.
•
Rotate the radiator cap «1» anticlockwise until it clicks once.
•
Wait for several seconds to allow any pressure in the system to be equalised.
•
Rotate the radiator cap «1» again anticlockwise and remove it.
•
Check that the liquid covers the radiator plates completely.
•
Also check the level in the expansion tank (underneath the engine sump
cover) from the relevant window.
•
The correct level should be between the MIN and MAX marks.
04_17
CAUTION
DO NOT ADD ADDITIVES OR OTHER SUBSTANCES TO THE FLUID.
WHEN USING A FUNNEL OR ANY OTHER ELEMENT, MAKE SURE IT IS PER-
FECTLY CLEAN.
•
If required, top-up with coolant until the radiator plates are covered. Do not
exceed this level; otherwise, the coolant will spill during engine operation.
When using a funnel or any other element, make sure it is perfectly clean.
•
Refit the radiator cap (1).
68