Proper Lifting Of Sprayer - Graco XM Series Operation

Proper Lifting of Sprayer

Proper Lifting of Sprayer
Follow instructions to avoid serious injury or damage
to equipment. Never lift with the hopper(s) filled.
To prevent spilling and to ensure even weight
distribution, drain all fluid prior to lifting th
proportioner.
Lift Using a Forklift
Power must be off. Sprayer can be raised and moved
using a forklift. Carefully lift the sprayer; make sure it
balances evenly.
NOTE: If 25-gallon hoppers are installed, make sure the
forklift arms extend across the entire unit. The forklift
must approach from the front of the unit.
16
NOTICE
Lift Using a Hoist
Sprayer can also be lifted and moved using a hoist.
Connect a bridle swing, hooking an end to each of the
air motor lift rings. Hook the center ring to a hoist. See
the following figure. Carefully lift the sprayer; make sure
it balances evenly. Do not lift with 25 gallon hoppers
attached to the unit.
2.0 ft (0.61 m)
minimum
312359R