Mode
Batch Dispense Test
Valve Test
312359R
User selects total volume desired.
Open A dosing valve, turn on blue light, user opens sampling valve, turn off
blue light when complete.
Open B dosing valve, turn on blue light, user opens sampling valve, turn off
blue light when complete.
Display shows volume of A and B components at end of batch dispense test.
If fluid pressure is not 1000 psi (7 MPa, 70 bar), STOP.
Check for no movement of pumps (stall within 10 seconds).
Control Logic
Troubleshooting
Alarms
--
--
--
--
P1AX, P1BX
F7AX, F7BX
71