Usb Board - HP Pavilion G4-1010 Maintenance And Service Manual

USB board

Description
USB board (includes cable)
Before removing the USB board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
●
Optical drive (see
●
Hard drive (see
●
Keyboard (see
●
Top cover (see
Remove the USB board:
1. Release the ZIF connector (1) to which the USB board cable is connected, and then disconnect the
USB board cable (2) from the system board.
2. Remove the Phillips PM2.5×6.0 screw (3) that secures the USB board to the base enclosure.
3. Remove the USB board (4) and cable.
64 Chapter 4 Removal and replacement procedures
Battery on page 42), and then remove the following components:
Optical drive on page
Hard drive on page 45)
Keyboard on page 50)
Top cover on page 53)
43)
Spare part number
639452-001