c.
Remove the display bezel (4). The display bezel is available using spare part number
639440-001.
6.
If it is necessary to replace the webcam/microphone module:
a.
Detach and release the webcam/microphone module (1) as far as the webcam/microphone
module cable allows. (The webcam/microphone module is attached to the display enclosure
with double-sided tape.)
b.
Disconnect the webcam/microphone module (2) from the webcam/microphone module.
c.
Remove the webcam/microphone module. The webcam/microphone module is available
using spare part number 637197-001.
7.
If it is necessary to replace the hinge covers:
a.
Remove the Phillips PM2.5×6.0 (1) screws that secure the hinge covers to the display
enclosure.
84
Chapter 4 Removal and replacement procedures