11.
If it is necessary to replace the wireless antenna cables and transceivers:
a.
Release the wireless antenna transceivers (1) from the display enclosure. (The wireless
antenna transceivers are attached to the display enclosure with double-sided tape.)
b.
Release the wireless antenna cables from the clips (2) built into the display enclosure.
c.
Remove the wireless antenna cables and transceivers (3). The wireless antenna cables and
transceivers are available in the Antenna Kit, spare part number 640294-001.
Reverse this procedure to reassemble and install the display assembly.
88
Chapter 4 Removal and replacement procedures