Rtc Battery - HP Pavilion G4-1010 Maintenance And Service Manual

RTC battery

Description
RTC battery (includes cable and double-sided tape)
Before removing the RTC battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
●
Optical drive (see
●
Hard drive (see
●
WLAN module (see
●
Keyboard (see
●
Top cover (see
●
System board (see
Remove the RTC battery:
1. Turn the system board upside down, with the front toward you.
2. Disconnect the RTC battery cable (1) from the system board.
Battery on page 42), and then remove the following components:
Optical drive on page
Hard drive on page 45)
WLAN module on page
Keyboard on page 50)
Top cover on page 53)
System board on page
43)
48)
67)
Component replacement procedures
Spare part number
637193-001
71