HP Pavilion G4-1010 Maintenance And Service Manual page 86

Before removing the processor, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
●
Optical drive (see
●
Hard drive (see
●
WLAN module (see
●
Keyboard (see
●
Top cover (see
●
System board (see
●
Heat sink (see
Remove the processor:
1. Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise (2), until you hear a click.
78 Chapter 4 Removal and replacement procedures
Battery on page 42), and then remove the following components:
Optical drive on page
Hard drive on page 45)
WLAN module on page
Keyboard on page 50)
Top cover on page 53)
System board on page
Fan and heat sink on page
43)
48)
67)
73)