Function Keys (F1-F6) - Furuno FSV-30 Operator's Manual

After the dialog box disappears the following message appears.
Note: If 10 items are already registered to the user menu the following
5. Select YES and press the [MENU] key to register item selected to the menu.
6. Select QUIT at the top of the menu screen and press the [MENU] key to
close all menus.
7.2

Function Keys (F1-F6)

The function keys provide one-touch display of desired menu item or entire
menu. The default function key settings are as below. Not all menu items and
menus may be programmed to the function keys. See the menu tree on page
M-1 to M-4 for items which may be programmed.
The default settlings are as below:
F1: PICTURE SHOT (PRESET, MEMORY CARD menu)
Store current picture
F2: RECALL PICTURE (PRESET, MEMORY CARD menu)
Recall picture in memory
F3: PRESENTATION MODE (DISPLAY SETTING menu)
Select presentation mode
F4: DIMMER (DISPLAY SETTING menu)
Adjust panel dimmer
F5: EVENT MARK (ERASE MARKS menu)
Erase event mark
F6: SHIP'S TRACK (ERASE MARKS menu)
Erase ship's track
USER MENU REGISTRATION
SELECTED ITEM WILL BE
REGISTERED IN MAIN MENU.
Message for registration of user menu item
message appears. Delete unnecessary items from the user menu and
then repeat this procedure to register different item.
10 ITEMS ALREADY REGISTERED.
DELETE UNNECESSARY ITEMS
AND TRY AGAIN.
Caution for registration of user menu item
7. CUSTOMIZING THE EQUIPMENT
YES
NO
CAUTION
7-3