How To Delete Items From The User Menu; Function Keys (F1 To F10) - Furuno FSV-35S Operator's Manual

5. HOW TO CUSTOMIZE THE EQUIPMENT
4. Select [Register] then push the left-click button.
The selected item is registered, and shown at the bottom of the menu. The order
of items in the [USER] menu can be changed by drag and drop.
Note: If 20 items are already registered to the user menu the following message
appears. Delete unnecessary items from the user menu and then repeat this pro-
cedure to register different item. Press the MENU/ESC key to close this message.
5. Long-press the MENU/ESC key to close all menus.
5.1.2

How to delete items from the user menu

To delete a menu item from the user menu which you do not require, do as follows.
1. Press the MENU/ESC key to open the main menu.
2. Select [
3. Select the item to delete then push the left-click button more than three seconds.
The message "Delete Registration Selected item will be removed from main
menu. Are you sure?" appears.
4. Select [Remove] then push the left-click button to delete.
5. Long-press the MENU/ESC key to close all menus.
5.2

Function Keys (F1 to F10)

The function keys provide one-touch display of desired menu item or entire menu. The
default function key settings are as below. Not all menu items and menus may be pro-
grammed to the function keys. See the menu tree on page AP-1 to AP-5 for items
which may be programmed.
Function key
F1 Record Still Image
F2 Recall Still Image
F3 Event Mark 1
F4 Event Mark 2
F5 Fish Mark
F6 Own Ship Pos Mark
F7 Ship's Track
F8 Dimmer
F9 Stabilization
F10 Net Course Mark
5-2
Shortcut Menu] then push the left-click button.
Default setting
Save the still image
Open the [Still Image] window
Erase event mark 1
Erase event mark 2
Erase fish mark
Erase own ship position mark
Erase approx. 10% of the ship's track
Adjust panel dimmer
Activate or deactivate the stabilization
Enter or erase the net course mark
Function