Table of Contents
Advertisement
10. MAINTENANCE, TROUBLESHOOTING
10.8
Error Codes
The equipment displays a (blinking) three-digit error code at the bottom of the
display when it detects internal trouble. In case of multiple error, error codes
appear in numerical order and the maximum number of codes displayable is five.
The codes remain on the screen until the corresponding trouble is fixed, and a
buzzer sounds each time a new error code is added to the on-screen error code
display. For any error code, report error code number to your dealer.
10.9
Status Messages
Status messages appear at the screen center to alert the operator. These are as
below.
Status
message
TX OFF
RAISE/LOWER
TEST*
* = Not displayed when TX is OFF.
10-6
* * * Error Code * * *
Figure 10-2 Error code
Table 10-4 Status messages
Transmission turned off from the menu.
Raise/lower command received from the control unit in normal
operation, to manually test raise/lower switch in hull unit.
Raise/lower keys on the control unit are inoperative during the hull
unit test.
#003, #006, #108
Meaning
Advertisement
Table of Contents
Troubleshooting
