Omron Sysmac CPM1 Operation Manual page 78

Programming Console Operations
Note When an instruction operand is input, the bit or word designation can
be omitted.
12. Input the next instruction.
F
5
FUN
Press the WRITE Key to write the instruction to Program Memory.
WRITE
• Writing an Unsigned Decimal Number
13. The first operand is input as an unsigned integer.
CONT
SHIFT TR
#
Input the value of the operand from 0 to 65535.
C F
2 5
Note If an erroneous input is made, press the CLR Key to restore the status
prior to the input. Then enter the correct input.
14. Restore the hexadecimal display.
SHIFT
Note If an input is made outside of the permissible range, a buzzer will
sound and the hexadecimal display will not be displayed.
WRITE
15. The second operand is input as a signed integer.
CONT
SHIFT
#
Input the value of the operand from –32,768 to 32,767. Use the SET Key to
input a positive number, and use the RESET Key to input a negative number.
B
REC
1
RESET
Note If an erroneous input is made, press the CLR Key to restore the status
prior to the input. Then enter the correct input.
16. Restore the hexadecimal display.
SHIFT
Note If an input is made outside of the permissible range, a buzzer will
sound and the hexadecimal display will not be displayed.
WRITE
17. Input the final operand and then press the WRITE Key.
WRITE
00203
A
0
ADB(050)
00203 ADB DATA A
00203 ADB DATA A
NOT
00203 ADB DATA A
6
00203 ADB DATA A
TR
00203 ADB DATA B
00203 ADB DATA B
TR
#+00000
00203 ADB DATA B
A
0
# 00010
00203 ADB DATA B
TR
00203 ADB DATA C
00203 ADB DATA C
DM
DM 0000
00204READ
NOP(000)
Section 4-3
#0000
#00000
#00256
#0100
000
#FFF6
000
67