Omron Sysmac CPM1 Operation Manual page 14

CPM1 Features and Functions
High-speed Counter
Analog Setting Function
Host Link Communications
1-to-1 Link
NT Link Communications
Standard Peripheral Devices The CPM1 uses the same Programming Consoles, SYSMAC Support Software
Programming is Possible
Using the PT
1-1-2 I/O Terminal – IR Bit Allocation
CPU Unit Terminals
Number of
I/O Terminals I/O Terminals
on the CPU
Inputs
Unit
10 6 points:
00000 to 00005
20 12 points:
00000 to 00011
30 18 points:
00000 to 00011
00100 to 00105
CPM1 PCs have a high-speed counter that can be used in incremental mode or
up/down mode. The high-speed counter can be combined with input interrupts
to perform target value control or zone comparison control that isn't affected by
the PC's cycle time.
The CPM1 PCs have 2 analog volume controls that can be used to make manual
analog settings.
The CPM1 PCs are compatible with the Host Link, which allows communica-
tions with personal computers. The CPM1 using the Host Link can also commu-
nicate with Programmable Terminal using host link commands.
An RS-232C Adapter is used for 1-to-1 communications and an RS-422 Adapter
is used for 1-to-n communications.
A data link can be created with a data area in another CPM1, CQM1, or C200HS
PC. An RS-232C Adapter is used to make the 1-to-1 connection.
High-speed operations can be achieved by providing a direct access by con-
necting the CPM1 to the Programmable Terminal through the NT Link Interface.
An RS-232 Adapter is used for this connection.
(SSS), and Ladder Support Software (LSS) as the Mini H-type and CQM1 PCs.
Programming operation is possible through the PT screen by using an OMRON
PT that has a built-in Programming Console function.
The following table shows which IR bits are allocated to the I/O terminals on the
CPM1's CPU Unit and Expansion I/O Unit.
Note The Expansion I/O Units consist of models with relay output. The Expansion I/O
Units can also be connected to CPM1A Expansion I/O Units (sink type or source
type) with transistor output. For more information about the transistor-output
Expansion I/O Units of the CPM1A, refer to the CPM1A Operation Manual
(W317).
Expansion I/O Unit Terminals
Outputs
4 points: 12 points:
01000 to 01003 00100 to 00111
8 points: 12 points:
01000 to 01007 00100 to 00111
12 points: 12 points:
01000 to 01007 00200 to 00211
01100 to 01103 36 points:
00200 to 00211
00300 to 00311
00400 to 00411
Inputs Outputs
8 points:
01100 to 01107
8 points:
01100 to 01107
8 points:
01200 to 01207
24 points:
01200 to 01207
01300 to 01307
01400 to 01407
Section 1-1
Power Model Number
Supply Supply
AC CPM1-10CDR-A
DC CPM1-10CDR-D
AC CPM1-20CDR-A
DC CPM1-20CDR-D
AC CPM1-30CDR-A
DC CPM1-30CDR-D
AC CPM1-30CDR-A-V1
(Available soon)
DC CPM1-30CDR-D-V1
(Available soon)
3