Camera Setup - Samsung Wisenet HCP-6320HAP User Manual

Camera SetuP

Zoom and focus Settings
focus mode
z
- AUTO : Performs continuous auto-focus.
- MANUAL : Changes the camera mode to Manual Focus.
- ONE SHOT : Auto-focuses the camera once after the Pan,
Tilt, or Zoom function is used.
Zoom tracking
z
Through this menu you can set up the camera's focus mode when
zooming.
- Mode
y AUTO : Auto-focuses when zooming.
y TRACKING : Focuses manually when zooming.
y OFF : Disable the focus modes when zooming. (Full manual
mode)
- Speed
y SLOW/MEDIUM/FAST : Adjusts the zooming speed.
Digital Zoom
z
Enables the maximum digital zoom.
Setting the digital zoom to 16x provides a total zoom of 512x.
M
`
Unlike the optical zoom, the graphics quality of the digital zoom decreases
as its zoom ratio increases.
`
The auto-focus function may not operate normally under the following
conditions :
- When background illumination is low
- While Slow-Shutter is in operation
- If the zoom level is set too high
- When background illumination is too high
- If a long distance object and a close distance object appear together
within a monitoring area
- If there is no contrast, e.g. the sky or a wall
- If the camera is facing a thin horizontal line
`
Auto Focus focuses on an object in the center of the screen; objects around
the screen edges may not be properly in focus.
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status

Camera Setting
Zoom/Focus
White Balance ATW
Exposure
Back Light OFF
AGC HIGH
SSNR MEDIUM
SSDR
Day & Night
Others

Zoom/Focus
Focus Mode ONE SHOT
Zoom Tracking
Digital Zoom OFF
English - 47