Samsung Wisenet HCP-6320HAP User Manual page 60

setup
y Tracking :
This will detect and trace a moving object. You can use the fence
function to count the moving objects. The default setting is the
same as in the Detect menu, to which the Fence Position function
is added.
- Fence : Specify the position and detectable direction of the line
fence or area fence, depending on the fence type.
y Display: Specify the display of the fence status.
y Type : You can select one of two types for the fence LINE and
AREA.
y Count : Display the number of times that an object enters or
exits from the fence.
M
`
In some cases, the Count function may have a difference between number
of the detected objects and counter number.
y Fill : Specify the use of color fi lling on the selected fence.
y Position : Specify the position and detectable direction of the line
fence or area fence, depending on the fence type.
` LINE FENCE
- SEL POS: Select a changing point from position 1 and
position 2.
- X POS/Y POS: Specify the position of the changing point that
- DIRECTION:
DIR 1: Detect an object that moves from left to right based on the specified fence line.
DIR 2: Detect an object that moves from right to left based on the specified fence line.
DIR 1/2: Detect an object that moves in any direction of right to left or left to right based on the
specified fence line.
` AREA FENCE
- SEL POS: Select a changing point from position 1 through
position 4.
- X POS/Y POS: Specify the position of the changing point that
- DIRECTION:
IN: Detect any object that enters the specified fence area.
OUT: Detect any object that exits from the specified fence area.
IN/OUT: Detect any object that enters or exits from the specified fence area.
setup
60_
you have selected in the SEL POS menu.
you have selected in the SEL POS menu.
Tracking
Fence
Detect Box ON
Detect Area
Mask Area
Sensitivity 3
Det. Size

Fence
Display ON
Type LINE
Count ON
Fill ON
Position
Fence
SEL POS POS1
X POS 30
Y POS 00
Direction DIR 1
Fence
SEL POS POS1
X POS 20
Y POS 10
Direction IN