Samsung Wisenet HCP-6320HAP User Manual page 79

P(Priority) :
z
Set the priority of Alarm Inputs. If more than one alarm is simultaneously activated,
the alarm with the highest priority activates before the others.
SeQ. :
z
Enables setting up a sequence action for the camera in response to an alarm.
You can configure the settings of: HOME/PRESET/SWING/GROUP/TOUR/TRACE/A.PAN/OFF
alarm/aux output
Setting 1, 2 :
z
Enables selecting an Alarm Output method.
- DETECT MODE : Displays the alarm input ports (1~4) and the
motion detection input. If you set MD Input, you
can select one from: OFF/MD.
- AUX MODE : Both Alarm OUT/AUX OUT 1 and 2 are NC/NO
timer 1, 2 :
z
- On : Retains an alarm output for a set duration from a
minimum of 1 second to a maximum of 60 minutes upon
the alarm occurrence.
- MOMENTARY : The output operation will last until an alarm/AUX
event is released since its occurrence.
- The Alarm/AUX output system is equipped with a relay circuit,
whose output port operates as below: (based on "NO")
NO
COM
NC
Alarm Out OFF
out off 1, 2 :
z
- Output of an alarm/AUX event can be forcibly terminated
when it occurred.
NO

COM
NC
Alarm Out ON
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status

Alarm Setting
Alarm Enable
Alarm Input
Alarm/AUX Output
MD Dwell Time
ALM Dwell Time

Alarm/AUX Output
Setting 1 DETECT MODE
Setting 2 DETECT MODE
Timer 1 OFF
Timer 2 OFF
Out Off 1
Out Off 2
English - 79
OFF
OFF
HOLD