Samsung Wisenet HCP-6320HAP User Manual page 59

y Detection :
Perform the intelligent motion detection.
- Detect Box: Display an object in a box that is detected to move in
your specified type.
- Detect Area : You can specify a motion detection area.
- Mask Area : You can specify an exceptional area to motion
detection by masking the area.
You can set up to 4 areas, for each of which you can
change the mask coordinates.
- Sensitivity : Specify the sensitivity level of the motion detection.
The lower the level is, the stronger the sensitivity
becomes.
- Detect Size : Specify the size of an object to detect on the screen.
The higher the level is, the greater the size becomes.
y Fixed/Moved :
Detect if an existing object (on the screen) disappears or if an object appears from nowhere and
stays for a certain time.
M
`
In following situations, FIXED/MOVED detection may not work properly.
If multiple motions continue at random.
➊
If a fixed object continues to move in the same position.
➋
If a newly appearing object conceals another object that is moving.
➌
`
5 to 15 seconds of recognition time is required if the [Intelligence] function is activated.
`
The focus mode will be controlled manually if [Intelligence] is enabled.
`
The performance of [Intelligence] may be deteriorated if the camera vibrates due to unstable installation.
Detection
Detect Box ON
Detect Area
Mask Area
Sensitivity 3
Det. Size
English - 59