The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Contents Features Precautions Components and Accessories Overview Front View Side View Bottom View Rear View Installation Procedures Lens • When Using Auto Iris Lens • When Using C/CS Mount Lens Connecting a Monitor Connecting Power Control via RS-485 Interface How to Use the Camera Function Menu Structure How to Set up the Functions LENS...
Chinese COLOR CCD CAMERA User’s Manual Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents Samsung Techwin s will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive.
Precautions Do not install under extreme Do not install in high humidity temperature conditions. environment. Use only under temperature conditions May lower image quality. between -10˚C and +50˚C. Provide good ventilation when using in high temperature conditions. Do not install under unstable Avoid touching the camera lens.
Components and Accessories 1. Ultra High Resolution WDR Color CCD Camera SHC-735 2. Auto Iris Lens Connector Plug 3. C-Mount Adapter 4. Instruction Manual 5. AC 24V/500mA Adapter COLOR CCD CAMERA User’s Manual Front View Tripod Mounting Bracket Screw Hole Used to fix the Tripod Mounting Bracket to the top of the camera.
Overview Side View Auto Iris Lens Connector Used to connect Auto Iris Lens plug. COLOR CCD CAMERA User’s Manual Bottom View Tripod Mounting Bracket Screw Hole Used to fix the camera on a bracket or tripod. The screw sizes for this hole are as follows: 1/4"-20 UNC (20 THREAD) L:4.5mm±0.2mm (ISO standard), or 0.197"...
Overview Rear View Function Setup Button SET Button : Displays the menu on the screen. Press this button to confirm status or after changing a selected item. Up and Down Button : Used to move the cursor up or down in the menu screen to select a desired menu item.
Installation Procedures 3. Remove the cover of the auto iris lens connector plug and solder the lens cable to the connector pin of the plug. • For a Video Drive Lens • For a DC Drive Lens Pin 1: Red (Power) Pin 1: Damping - Pin 2: NC Pin 2: Damping +...
Installation Procedures • When Using a C Mount Lens 1. Remove the protective glass cover at the front of this product and turn the C- Mount Adapter clockwise to install it. 2. Turn the C-Mount lens clockwise to install it. 3.
* RS-485 Communication establishment initial value Item Initial value Notes #18(0.83mm • To control the camera by constructing an additional controller, use Pelco-D 0.018 protocol or STW protocol (Samsung Techwin protocol). 0.006 Serial Cable RS-485 Converter RS-485 Control Port 485+ 485-...
How to Use the Camera MAIN SETUP 1.LENS Select the function using the UP or DOWN button. 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SSNR 6.DAY/NIGHT AUTO 7.IMAGE ADJ 8.SPECIAL 9.EXIT 3. Set up a selected item by using the Left and Right buttons. 4.
How to Use the Camera EXPOSURE MAIN SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SSNR 6.DAY/NIGHT AUTO 7.IMAGE ADJ 8.SPECIAL 9.EXIT 1. When the SETUP menu screen is displayed, select EXPOSURE by using the Up and Down buttons so that the arrow indicates EXPOSURE . 2.
How to Use the Camera White Balance (White Bal.) Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is displayed, select ‘White Bal.’ by using the Up and Down buttons so that the arrow indicates ‘White Bal.’ . 2.
How to Use the Camera WDR : When there are both bright and dark areas at the same time, this mode makes both areas distinctive. OFF : Deactivates the WDR function. BLC : Enables a user to directly select a desired area from a picture, and to view the area more clearly.
How to Use the Camera 3. Set the SSNR mode to ‘ON’ and press the SET button. Then you can adjust the noise reduction level. Notes • You cannot set the SSNR to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE menu is ‘OFF’.
How to Use the Camera IMAGE ADJ. 1. When the SETUP menu screen is displayed, select ‘IMAGE ADJ.’ by using the Up and Down buttons so that the arrow indicates IMAGE ADJ. MAIN SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SSNR 6.DAY/NIGHT AUTO 7.IMAGE ADJ...
How to Use the Camera SPECIAL 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Up and Down buttons so that the arrow indicates ‘SPECIAL’. MAIN SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SSNR 6.DAY/NIGHT AUTO 7.IMAGE ADJ 8.SPECIAL 9.EXIT 2.
How to Use the Camera Enter a title, move the cursor to ’POS’ and press the SET button. The entered title appears on the screen. Select the position to display the title on the screen by using the 4 direction buttons and press the SET button. When the position is determined, select ’END’...
How to Use the Camera - MASK COLOR : Determine area color. You can select Gray, Green, Red, Blue, Black, White. - TRANSP : Determine the transparency of selected area as controlling number from 0 to 3. - RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu.
Troubleshooting Problem Solution The Motion Detection • Check that MOTION DEF of SPECIAL SETUP menu function does not is ‘OFF’. work. Color is not correct. • Check the setting of WHITE BAL SETUP menu . The screen flickers • Check that direction of camera turns toward the continually.