Samsung Wisenet HCP-6320HAP User Manual page 70

setup
area Setting
The Area Setting menu enables selecting certain locations in the course
of the Pan and Tilt operation, and then display the areas with the OSD
(On Screen Display) texts when the camera passes through them. Up to
12 areas can be selected.
area name :
z
You can add names to selected areas. Names can be up to 12
characters and can be entered via the joystick and the Enter key.
Once a name is entered, use the joystick and the Enter key to
perform the Set command and save the name.
Area Name
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
a b c d e f g h i j k l m
n o p q r s t u v w x y z
1 2 3 4 5 6 7 8 9 0 ( )
[ ]-/
!?,.
T
BACK SPACE CLR SET
Position :
z
As shown in the picture below, move the joystick to select the upper
left corner and lower right corner of an area.
Area Setting
Enter: Set ESC: Exit
The effective positioning range is between -45° and 40° in the tilting
angle at the zoom factor of 1x.
activation :
z
Cancels or activates the display function of selected areas.
setup
70_
[ ]
Area Setting
Enter: Set ESC: Exit
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status

P/T Setting
Pan/Tilt Limit
Area Setting
Area Masking
Prop. P/T
Digital Flip
Image Hold
Jog Speed
Max Speed Level

Area Setting
Area 1
Area 2
Area 3
Area 4
....

Area Setting
Area Name
Position
Activation
ON
ON
OFF
MANUAL
5
OFF