Samsung Wisenet HCP-6320HAP User Manual page 21

baud rate settings
Select the transfer speed of a selected communication protocol.
no baud rate (bPs)
1 2,400
2 4,800
3 9,600
4 19,200
Communication method settings
Select a communication method for the camera.
SW2- #7
Communication response settings
Select a communication response method for the camera and controller: Response or No Response.
SW2- #10
Termination settings
To prevent the attenuation of communication signals between the camera and controller, the items at
the end of line must be set up with the termination settings.
Camera input Position
Termination of Longest Path (RS-422)
Termination of Longest Path (RS-485)
On the Path
y Example of terminal setting
function
Transfer Mode Switch
function
Response Mode Switch
sW2- #8
ON
ON
OFF
Ú If using RS-422, SW2-#8: ON /SW2-#9: ON for camera 16
Ú If using RS-485, SW2-#8: ON / SW2-#9: OFF for camera 16
sW2-#5
ON
ON
OFF
OFF
on
RS-422 (4Wire)
on
Response
sW2-#6
ON
OFF
OFF
ON
off
RS-485 (2Wire)
off
No Response
sW2- #9
ON
OFF
OFF
English - 21