Samsung Wisenet HCP-6320HAP User Manual page 7

CauTions for oPEraTing TEmPEraTurE (for EnvironmEnTal moDEls)
1. The camera cannot operate properly at temperatures lower than -50°C.
2. If the product is kept at a low temperature, it may take a max of 2 hours to warm up for normal
operation.
3. If the camera was turned on after being left at temperatures lower than -50°C for a long duration:
- If the internal temperature is lower than -20°C, the camera does not transmit video signals and
displays a black screen along with the "Wait to warm up(xx Left)" message, instead of operating
properly.
- If the internal temperature is higher than -20°C and lower than -10°C, the "Wait to warm up(xx Left)"
message disappears as the camera resets itself and enters the operation mode.
However, only manual P/T operation is in effect while the Sequence and Turbo commands are limited
in use.
- If the internal temperature is higher than -10°C, the camera activates all Sequence and Turbo
commands.
4. The speed of the horizontal/vertical rotation will be deteriorated than normal at below -10°C degrees
for the indoor model, and at below -40°C degrees for the environmental model.
5. If the heater malfunctions, a message appears as follows.
- "Please Check Heater System"
- If this message appears, turn off the camera and call where you bought.
Hanwha Techwin
is taking measures to provide customers with more environmentally friendly products.
The Eco mark represents
friendly products, and indicates that the product satisfies the EU RoHS Directive.
cares for the environment at all product manufacturing stages, and
Hanwha Techwin'
s devotion to creating environmentally
English - 7