Samsung Wisenet HCP-6320HAP User Manual page 42

connection & installation
❖ notes for waterproofing
This product is an indoor unit. If it is installed outdoors, use the outdoor housing to make it
waterproof.
Installing the unit on the wall by combining the outdoor housing and wall mount
`
1. Install the wall mount on the vertical wall. If
the mount is installed on an inclined wall,
moisture can penetrate inside the outdoor
housing through the external cable.
2. Wrap the screw part of the housing with a
sufficient amount of Teflon tape for assembly.
3. When separating the dome cover and
fastening it to the housing frame, make sure
that the gasket is not loosened to separate
from the dome cover.
4. Install the wall mount adapter for
waterproofing, and apply the silicon sealant
between and around the wall and wall mount
for sealing.
J
`
Take particular caution to ensure that there is proper sealing if the installed side is not flat.
connection & installation
42_
Silicon
sealant
Wall mount
Screw
unit
Concrete wall
Teflon tape
Dome gasket