Related Manuals for ZyXEL Communications FTU2000
Summary of Contents for ZyXEL Communications FTU2000
- Page 1 FTU2000 Fiber Termination Unit Edition 1, 2/2010 Copyright 2010 ZyXEL Communications Corporation www.zyxel.com...
-
Page 2: Device Panel
Device Panel FIBER PORT FIBER POWER CATV with COVER ENTRANCE PORT or EXIT POWER LED... - Page 3 Overview The FTU2000 is a Fiber Termination Unit (FTU) which can deliver Fiber to the Home (FTTH) network services such as data, voice and video to home users. The FTU2000 provides cable television (CATV) service to subscribers. Simply connect the FTU2000 to the CATV fiber outlet in your home.
-
Page 4: Hardware Connections
If you are using both FTU2000 and FSG2200HNU, the power coming from the FSG2200HNU is enough for both devices and there is no need to connect the FTU2000 to a power source. In this setup, the CATV service is not available when the FSG2200HNU is turned off. - Page 5 Connecting to a FSG2200HNU If you have subscribed to both CATV and fiber-based Internet services but have only one fiber outlet at home, you can use the FTU2000 to bridge the fiber port to the FSG2200HNU. Follow these steps to connect the FTU2000 to the FSG2200HNU.
- Page 6 3. Place the FSG2200HNU on top of the FTU2000, such that the nodule of the FTU2000 goes into the hollow for the fiber port of the FSG2200HNU, as shown below: Slide the FSG2200HNU to your right so that the two devices are...
- Page 7 The coiling method approproate to where and how you are going to position the device in your home. • The following diagrams show the coiling method when you are using the FTU2000 as a standalone unit, where you only need one (1) fiber optic cable.
- Page 8 • The following diagrams show the coiling methods used when you are using the FTU2000 together with the FSG2200HNU. This setup uses two (2) fiber optic cables. Refer to the Quick Start Guide and User Guide of your FSG2200HNU for...
-
Page 9: Product Specifications
Product Specifications The following tables summarize the FTU2000’s hardware and firmware features. Hardware Specifications Box dimensions 326 mm (L) x 184 mm (W) x 91 mm (H) Weight 350 g Input Power 12VDC 1.0 A Operation 0º ~ 40º C... - Page 10 CE mark EN60950 (2001) Wall-mounting Instructions Do the following to hang your FTU2000 on a wall. 1. Locate a high position on a wall that is free of obstructions. Use a sturdy wall. You can hang the FTU2000 horizontally or vertically.
- Page 11 3. Do not screw the screws all the way into the wall. Leave a small gap of about 0.5 cm between the heads of the screws and the wall. 4. Make sure the screws are snugly fastened to the wall. They need to hold the weight of the FTU2000 with the connection cables.
- Page 12 5. Align the holes on the back of the FTU2000 with the screws on the wall. Hang the FTU2000 on the screws. Horizontal...
- Page 13 Vertical...
- Page 14 The following are dimensions of an M4 tap screw and masonry plug used for wall mounting. All measurements are in millimeters (mm).
-
Page 15: Safety Warnings
Safety Warnings • Do NOT use this product near water, for example, in a wet basement or near a swimming pool. • Do NOT expose your device to dampness, dust or corrosive liquids. • Do NOT store things on the device. •... -
Page 16: Legal Information
Published by ZyXEL Communications Corporation. All rights reserved. Disclaimer ZyXEL does not assume any liability arising out of the application or use of any products, or software described herein. Neither does it convey any license under its patent rights nor the patent rights of others. ZyXEL further reserves the right to make changes in any products described herein without notice. - Page 17 ZyXEL. This warranty shall not apply if the product has been modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions.