Fiber Status - ZyXEL Communications FMG Series User Manual

Each field is described in the following table.
Table 8 Device Status Screen
LABEL
System
Model Name
Uptime
Firmware
Version
CPU Usage
Memory Usage
IP Configuration
IP Address
IP Subnet Mask
MAC Address
LAN/WAN Port Status
LAN
Status
Speed
Refresh

3.3 Fiber Status

Use this screen to view the status of the FMG. Click Status > Fiber to open this screen.
Figure 12 Fiber Status Screen
Chapter 3 Status
DESCRIPTION
This shows the model number of your FMG.
This field displays how long the FMG has been running since it last started up. The FMG starts
up when you plug it in, when you restart it (Maintenance > Reboot), or when you reset it.
This is the current version of the firmware inside the FMG.
This field displays what percentage of the FMG's processing ability is currently used. When
this percentage is close to 100%, the FMG is running at full load, and the throughput is not
going to improve anymore. If you want some applications to have more throughput, you
should turn off other applications.
This field displays what percentage of the FMG's memory is currently used. Usually, this
percentage should not increase much. If memory usage does get close to 100%, the FMG is
probably becoming unstable, and you should restart the device. See
39, or turn off the device (unplug the power) for a few seconds.
This is the current IP address of the FMG in the LAN/WAN.
If the FMG has a fiber connection, this field will show the WAN IP address.
This is the current subnet mask in the LAN.
This shows the LAN Ethernet adapter MAC (Media Access Control) Address of your FMG.
This column displays each interface the FMG has.
This field indicates the interface's use status.
This field displays Up when using the interface and Down when not using the interface.
This displays the port speed and duplex setting.
Click this to update the information in this screen.
FMG Series User's Guide
21
Section 8.2 on page