User Account Add/Edit - ZyXEL Communications VMG4005-B50B User Manual

Table 14 Maintenance > User Account (continued)
LABEL
Apply
Cancel

9.2.1 User Account Add/Edit

Click Add New Account or the Edit icon of an existing account in the Maintenance > User Account to
open the following screen.
Figure 19 Maintenance > User Account > Add/Edit
The following table describes the labels in this screen.
Table 15 Maintenance > User Account > Add/Edit
LABEL
Active
User Name
Old Password
Password/New
Password
Verify Password/
Verify New
Password
Retry Times
Idle Timeout
Lock Period
Group
Chapter 9 User Account
DESCRIPTION
Click Apply to save your changes back to the VMG.
Click Cancel to restore your previously saved settings.
DESCRIPTION
Select Enable or Disable to activate or deactivate the user account.
Enter a new name for the account. This field displays the name of an existing account.
Type the default password or the existing password used to access the VMG Web Configurator.
Type your new system password (up to 256 characters). Note that as you type a password, the
screen displays a (*) for each character you type. After you change the password, use the new
password to access the VMG.
Type the new password again for confirmation.
Enter the number of times consecutive wrong passwords can be entered for this account. 0
means there is no limit.
Enter the length of inactive time before the VMG will automatically log the user out of the Web
Configurator.
Enter the length of time a user must wait before attempting to log in again after a number if
consecutive wrong passwords have been entered as defined in Retry Times.
Specify whether this user will have Administrator or User privileges.
VMG4005-B50B User's Guide
39