Add A New User Screen; Figure 19 Add A New User; Table 16 Add A New User - ZyXEL Communications NSA-2400 User Manual

4.4.2 Add a New User Screen

Figure 19 Add a New User

The following table describes the labels in this screen.

Table 16 Add a New User

LABEL
New User Information
Enabled
User Name
Email Address (optional)
Password
Password (confirm)
Quota
NSA-2400 User's Guide
DESCRIPTION
You must select this check box in order for this user to be able to access
the NSA.
Type a user name from 1 to 32 single-byte ASCII characters. See
4.4.1 on page 56 for more details on user names.
Enter a valid e-mail address for this user. You can use up to 200
alphanumeric characters (periods and the underscore are also allowed)
without spaces.
Create a password associated with this user. You can type from one to 14
single-byte (no Chinese characters allowed for example) ASCII
characters.
Non-admin users can change their passwords by logging into the NSA
web configurator using the username and password as defined here.
After logging in, the Change Password screen is displayed. Enter a new
password in that screen and confirm it by re-entering it. Non-admin users
do not see other web configurator screens.
You must type the exact same password that you just typed in the above
field.
This is the maximum amount of space this user is allowed per volume.
Type a positive whole number (no floats, no negatives) as the maximum
amount of storage (in MB) this user may use on the NSA. 0 MB means
unlimited storage. The quota cannot exceed 500000000 MB.
Chapter 4 Sharing Screens
Section
57