Changing The Stamp Position; Specifying The First Printing Page And Start Number ("P1,P2 - Gestetner DSm735e Copy Reference Manual

Changing the stamp position

Changes the stamp position.
A
Press [Change] under Stamp Position.
B
Select the desired position, and then press [OK].
Specifying the first printing page and start number ("P1,P2...", "-1-,-2-...", "P.1,P.2...",
"1,2...")
Below explains the example when "P1, P2 ..." is selected. The steps are the same
for other cases.
A
Press [Change] on the right side.
B
Press [First Printing Page], enter the original page number from which to start
printing with the number keys, and then press the {q} key.
C
Press [Numbering from / to], enter the number of page from which to start
numbering with the number keys, and then press the {q} key.
The example below shows when the first printing page is "2"and the start
number is "3".
GCANPE2J
Copier Functions
2
95