Placing Originals On The Exposure Glass - Gestetner DSm735e Copy Reference Manual

Placing Originals
A
Press [Special Original].
1
B
Select the original orientation ([
Note
❒ It is recommended that you use the Original Orientation function with the
Auto Paper Select or Auto Reduce / Enlarge function.

Placing Originals on the Exposure Glass

Place originals on the exposure glass.
Important
❒ Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or
be damaged.
A
Lift the ADF.
Be sure to lift the ADF by more than 30 degrees. Otherwise, the size of the
original might not be detected correctly.
B
Place the original face down on the exposure glass. The original should be
aligned with the rear left corner.
Start with the first page to be copied.
1 Positioning mark
2 Scale
C
Lower the ADF.
16
] or [ ]), and then press [OK].
ZEWH050E