Size Magnification - Gestetner DSm735e Copy Reference Manual

Copying
C
Place the originals, and then press the {Start} key.
Reference
p.10 "Originals not recommended for the Auto Document Feeder (ADF)"

Size Magnification

2
You can calculate an enlargement or reduction ratio based on the lengths of the
original and copy.
Measure and specify the lengths of the original and copy by comparing "A" with
"a".
A
Press [Reduce / Enlarge].
B
Press [Specifd. Ratio].
C
Make sure [Size Magnificatn] is highlighted.
D
Enter the length of the original with the number keys, and then press [q].
You can enter sizes between 1 to 999 mm (0.1" to 99.9") in 1 mm (0.1") steps.
E
Enter the length of the copy with the number keys, and then press [q].
F
Press [OK] twice.
G
Place the originals, and then press the {Start} key.
42
ANP059S