Troubleshooting
• Thin and flimsy originals
• Originals with index tabs
• Transparent originals such as OHP transparencies or translucent paper
Note
❒ You cannot place originals of different sizes at the same time.
❒ Remove staples or clips from the originals, and then fan the originals lightly.
❒ Do not stack originals above the limit mark.
x " lights and "A" is indicated
x
x
When "x
A paper misfeed has occurred in the paper feed section.
R CAUTION:
• Be careful not to cut yourself on any sharp edges when you reach inside the
5
machine to remove misfed sheets of paper or masters.
A A A A
Slowly but firmly pull out the paper.
B B B B
If the indicators remain lit, open the front door and close it firmly.
Reference
See p.99 "To prevent paper misfeeds".
96
ZFRY010E