Table of Contents
Advertisement
4 Mode Setting
No.
Mode
1
Auto Cycle
ON/OFF
2
Ignore Paper Size If you are making prints on paper of custom sizes, you can set pa-
3
No Orig.
Size(ADF)
4
Background
ON/OFF
5
Longer Paper
6
Combine/Repeat You can choose to have either Combine or Repeat selected by de-
7
Cancel Comb.
8
No. of Skip Feed
Description
You can select to have Auto Cycle mode as either "ON" or "OFF"
when the power is turned on.
Note
❒ Default: ON
per size detection to "Ignore".
Note
❒ Default: Do not Ignore
If you are setting long originals in the optional document feeder
(ADF), you can set original detection to "Ignore".
Note
❒ Default: Do not Ignore
When you make prints in Photo, Letter/Photo, or Tint mode, the
background of the prints might appear dirty. In this case, you can
select "Back. Correction" to improve the clarity of your prints.
Note
❒ Default: W/O back. correction
You can select "Use" to allow the use of paper longer than
432mm, 17.0".
Note
❒ Default: Do not use
fault when the power is turned on.
Note
❒ Default: Use (Combine)
You can specify whether Combine/Repeat mode will be auto-
matically cleared after you have finished your print job.
Note
❒ Default: Do not cancel
You can specify the number of times that the drum rotates when
in Skip Feed mode. You can also choose whether or not to change
the number of drum rotations temporarily when you press the
{ { { { Skip Feed} } } } key. See p.52 "Skip Feed Printing".
Note
❒ Default:
• Number of Skip Feed: 2
User Tools Menu
3
75
Advertisement
Table of Contents
