Ties - Extron electronics DXP DVI Pro User Manual

Example 3: Removing a Tie from a Set of Ties
In the following example, an existing tie is removed from the current configuration. The
steps show the front panel indications that result from your action.
NOTE:
1.
Press the Esc button to clear all
ENTER
Figure 24.
2.
Press the Video button to toggle video off.
The button is unlit or background illuminated
Figure 25.
3. Press and release the input 5 button.
1 2
Figure 26.
4. Press and release the Output 4 button.
Press and release the Output 4 button.
The button blinks red to indicate the pending change:
audio input will be untied.
1
Figure 27.
This example assumes that you have performed examples 1 and 2.
>
button.
selections.
C O N T R O L
VIEW ESC
PRESET
The button flashes once.
Clear All Selections
VIDEO
when deselected.
Select Audio Only
Press and release the Input 5 button.
The button lights red.
INPUTS
3 4 5 6 7
Select an Input
2 3 5 6 7
4
OUTPUT
Deselect the Output
I / O
AUDIO
Press the Audio button to toggle Audio on.
The button lights red when selected.
The Output 3, Output 4, and Output 8 buttons
light red to indicate the audio ties created in
example 1.
1 2 3
8
The Output 1 button does not light green to indicate the
tie created in example 2 because that tie is video only.
CONTROL
8
VIEW
ENTER PRESET
The Enter button blinks
green to indicate the need to
confirm the change.
4 5 6 7 8
OUTPUT
ESC
23