Special Characters - Extron electronics DXP DVI Pro User Manual

Software Operation Via Ethernet
operate it, locally or remotely, using the Matrix Switcher Control Program. See
Connection" on page 9 for connection details.
of password protection: administrator and user. Administrators have full access to all DXP
recall presets, and view all settings with the exception of passwords. If the same password
or no password is required for logging on, all personnel are logged on with administrator
privileges. Fields and functions that exceed user privileges are grayed out in the control
program when the operator is logged on as a user.
Ethernet protocol settings
The IP Settings/Options screen
page 77 for more details).

Special Characters

not accept these characters in preset names, the switcher name, passwords, or locally
can be used in names)
Using the Software
Many items in the Matrix Switcher Control Program are also accessible via front panel
controls (see the "Operation" section, starting on page 11), under SIS control (see the
"SIS Configuration and
(see the "HTML Operation
Program provides information on settings and on how to use the control program, itself.
1. To run the Matrix Switcher Control Program, click on the
Switcher + Control Pgm icon
icon by selecting:
Start > All Programs > Extron Electronics > Matrix Switchers >
Matrix Switcher + Control Program
The Comm Port Selection window opens.
Figure 70.
(shown on page 77) provides a location for viewing and,
+ ~ , @ = ` [ ] { } < > ' ' " " ; : | \
Control" section, starting on page 47), and via the web pages
Start
Comm Port Selection Window
"Ethernet
IP Setup" on
space}
not recommended: {
?
and .
Matrix
(spaces
71