Extron electronics DXP DVI Pro User Manual page 73

X4%
X4^
X4&
= Port number
X4*
X4(
= Parity
required)
X5)
= Data bits
X5!
= Stop bits
X5@
= Port type
X5#
NOTE: If tagged responses is enabled (modes 2 and 3), all read commands return the constant
string and the value as the set command does (for example, the read matrix name
E }
CN
command
X5$
= Port timeout interval
(in 10 second increments)
X5%
= Time (in 10 ms increments) to wait 10 (= 100 ms, default) through 32767
for characters
X5^
= Time (in 10 ms increments) to wait 2 (= 20 ms, default) through 32767
between characters
0 = no response
1 = fail or missing
2 = fixed or restored
3 = both 1 and 2
4 = suspend
0 = off, 1 = on
01 through 99 (two ASCII characters)
9600, 19200, 38400, 115200
odd, even, none, mark, space (only the first letter
7, 8 (default = 8)
1, 2 (default = 1)
0 = RS-232
1 = RS-422
0 = clear/none (default for Telnet connection)
1 = verbose mode (default for RS-232 or RS-422
connection)
2 = tagged responses for queries
3 = verbose mode and tagged for queries
X3)]
, returns Ipn
).
1 (= 10 seconds) through 65000
(Default is 30 = 300 seconds = 5 minutes)
67