Operation; Definitions - Extron electronics DXP DVI Pro User Manual

Operation

This section describes the DXP front panel controls and the procedures for configuring and
operating the DXP switchers. Topics include:

Definitions

this guide:
Definitions
Front Panel Controls and Indicators
Powering On
Creating a Configuration
Viewing a Configuration
I/O Grouping
Saving and Recalling Presets
Muting and Unmuting Video and Audio Outputs
Locking and Unlocking the Front Panel (Executive Modes)
Resetting
Setting the Button Background Illumination
Selecting the RS-232/RS-422 Port Protocol and Baud Rate (Rear Panel)
Troubleshooting
Configuration Worksheets
Tie — An input-to-output connection
Set of ties — An input tied to two or more outputs. (An output can never be tied to
more than one input.)
Configuration — One or more ties or sets of ties
Current configuration — The configuration that is currently active in the switcher
(also called configuration 0)
EDID (Extended Display Identification Data) — Resolution, refresh rate, and pixel
clock information for a display device. This information is stored in memory at system
available to be assigned to any input.
Global memory preset
presets can be stored in memory. Preset locations are assigned to the input buttons
and (where necessary) output buttons. All models have 32 presets available from the
current configuration.
11