Extron electronics DXP DVI Pro User Manual page 42

4. One at a time, press and hold the Output 3 button and then the Output 4 button
until each button begins to blink (approximately 2 seconds). The output 3 and
output 4 video and audio signals are muted.
Mute outputs one at a time.
Press and hold the Output 3 button.
3
2 seconds
NOTE: Video is muted in this example.
Press and hold the Output 4 button.
4
2 seconds
Figure 55. Mute the Outputs
NOTES: If both video and audio are selected, the mute action toggles both the
video and audio outputs. If either the video output or the audio output
is already muted, the unmuted output is muted and the muted output is
unmuted.
If both video and audio are selected and only video is muted, the output
button flashes between green and amber. If only audio is selected, the
output button flashes between red and amber.
5. One at a time, press and hold the Output 3 button and then the Output 4 button
for approximately 2 seconds until each button returns to its previous state. The video
and audio signals for outputs 3 and 4 are unmuted.
Unmute outputs one at a time.
Press and hold the Output 3 button.
3
2 seconds
Press and hold the Output 4 button.
4
2 seconds
Figure 56. Unmute the Outputs
NOTE: If both video and audio are selected, the unmute action toggles both
the video and audio outputs on and off. If either the video output or the
audio output is already unmuted, the muted output is unmuted and the
unmuted output is muted.
6.
Press the View button
to exit view-only mode.
All input buttons and output buttons
VIEW
return to unlit or background illumination.
The View button returns to
unlit or background
illumination.
Figure 57. Press the View Button to Exit View-only Mode
The button blinks to indicate
3
that the output is muted.
Green = Video is muted.
Red = Audio is muted.
Amber = Video and audio are muted. (Amber is visible only
after you have selected the Video and Audio buttons).
The button blinks to indicate
4
that the output is muted.
The button returns to its previous indication
3
(either lit, background illuminated, or unlit)
to indicate that the output is unmuted.
The button returns to its previous indication
4
(either lit, background illuminated, or unlit)
to indicate that the output is unmuted.
36