Table of Contents
Advertisement
Remote Commander and Control Panel Keys
Remote Commander
Control Panel Keys
Turning on the power/Going to standby mode
/ (On/Standby) key
Selecting an input signal (page 14)
INPUT key
Operating a menu (page 18)
MENU key
RESET key
ENTER //// (arrow) keys
RETURN key
Adjusting the image (page 15)
ASPECT key (page 21)
KEYSTONE key (page 16)
PATTERN key (page 17)
APA (Auto Pixel Alignment) key
Note
*1: Use this key when inputting a computer signal via the
RGB input terminal (INPUT A).
Using various functions during projecting
D ZOOM (Digital Zoom) +/– key
Enlarges a portion of the image while projecting.
1
Press the D ZOOM + key to display the digital zoom
icon on the projected image.
*1
(page 17)
*1 *2
6
2
Press the /// keys to move the digital zoom icon
to the point on the image you want to enlarge.
3
Press the D ZOOM + key or the D ZOOM – key
repeatedly to change the enlargement ratio. The
image can be enlarged up to 4 times.
Press the RESET key to restore the previous image.
BLANK key
Cuts off the projected image temporarily. Press again to
restore the previous image.
MUTING key
Mutes the audio output temporarily. Press again to
restore the previous volume.
VOLUME +/– key
Adjusts the volume output.
*2
FREEZE key
Pauses a projected image. Press again to restore the
image.
Notes
*1: Use this key when inputting a computer signal. But it
may not be used depending on the resolution of the
input signal.
*2: Use this key when inputting a computer signal or a
1080/60p signal. You cannot use this key when "Type B
USB" or "Network" is selected as the input.
Setting the energy–saving mode easily
ECO MODE key
Energy-saving mode can be set easily. Energy-saving
mode consists of "Light Output Mode," "With No Input,"
"With Static Signal" and "Standby Mode."
1
Press the ECO MODE key to display the ECO Mode
menu.
2
Press the / key or ECO MODE key to select "ECO" or
"User" mode.
ECO:
Sets each mode to the optimum energy-saving
value.
Light Output Mode: Low
With No Input: Standby
With Static Signal: Light Dimming
Standby Mode: Low
Speaker Setting: Sync with Power
User:
Sets each item of the ECO Mode menu as you desire
(go to step 3).
Advertisement
Table of Contents
