Table of Contents
Advertisement
Aspect
Input signal
4:3
16:9
16:10
4:3
16:9
Recommended setting value
and projected image
*1 *2 *3
Full 1
*1 *2 *3
Full 1
*3
Full 1
*4 *5
4:3
16:9
*1: If you select "Normal," the image is projected in the same
resolution as the input signal without changing the aspect
ratio of the original image.
*2: If you select "Full 2," the image is projected to fit the
projected image size, regardless of the aspect ratio of the
image.
*3: If you adjust the projected image position using an image
with 16:9 aspect ratio and then switch the input source to
4:3 image, the top and bottom edge of the image may be
hidden. In this a case, select "Full 3."
*4: Depending on the input signal, the projected image may
be projected as illustrated below. In this a case, select
"16:9."
*5: Depending on the input signal, the image may be
projected as illustrated below. In this a case, select "Zoom."
22
Advertisement
Table of Contents
