Table of Contents
Advertisement
Presentation Function via Network
Using Presentation Function
via Network
The Presentation Function via Network enables
you to do the following:
• Connect a maximum of eight computers to the projector.
• Project images from a maximum of four computers
simultaneously.
• Connecting a USB wireless LAN module (not supplied) to
the projector as an access point, allows the projector to
connect to up to seven computers simultaneously.
Presentation Function via Network requires
installation of Projector Station for Network
Presentation. For information on getting and
updates of Projector Station for Network
Presentation, visit Sony's web site:
https://www.sony.co.uk/pro/product/projectors-
installation/vpl-phz10/support/#support
System requirements for using the application are
as follows.
OS
Windows 8/8.1
Windows 10
Mac OS X: 10.12.x/10.13.x/10.14.x
CPU
1 GHz or faster processor which guarantees the
operation of the above Operating system
Notes
• To install the application, administrative rights are
required.
• If you do not have administrative rights, the application
may not run properly.
• If firewall or security software is installed, the application
may not run properly.
• Depending on the type of network adapter, the
application may not run properly.
• Images may not be projected properly depending on the
operating environment or the application.
Installing Projector Station for Network
Presentation
1
Close all running applications.
2
Open the downloaded file.
For Windows
Double-click the .exe file. When the message "User
Account Control" is displayed, click "Allow" or "Yes."
For Mac
Double-click the .pkg file.
3
Follow the on-screen instructions to install the
software.
Starting Projector Station for Network
Presentation
1
Connect the projector to a network.
For a wired connection, connect the projector by a LAN
cable, then make the network settings. For details, see
"LAN Settings" (page 25) or "Setting the LAN Network of
the projector" (page 31)).
For a wireless connection, see "LAN terminal" (page 9)
or "USB terminal (Type A) (
"WLAN Settings" (page 25).
2
Turn on the projector.
Select "Network" as the input source (page 14).
3
Start Projector Station for Network Presentation.
For Windows
Select [Start]-[All Programs]-[Projector Station for
Network Presentation] on the computer.
For Mac
Double-click [Projector Station for Network
Presentation] in Applications folder.
Projecting an Image
When you start Projector Station for Network
Presentation for the first time after installing to
your computer, the connection guidance window
will be displayed. This window gives you the
information for the necessary settings for
connection. Be sure to read it thoroughly. When
starting the application after the first time, the
connection method selection window will be
displayed first. You can check the connection
guidance window anytime from the connection
method selection window.
Note
The appearance of the application on the screen is subject to
change without notice.
38
)" (page 9). Also check
Advertisement
Table of Contents
