Station For Network Presentation - Sony VPL-PHZ12 Operating Instructions Manual

1
Close all running applications.
2
Open the downloaded file.
For Windows
Double-click the
"PJS_NetworkPresentationP_XXX.exe" file for
portable. If the User Account Control window is
displayed, click "Allow" or "Yes."
For Mac
Double-click the
"PJS_NetworkPresentationP_XXX.pkg" file.
3
Follow the instructions in the wizards to install the
application software.
Error code list of Projector Station for Network Presentation
Error code Meaning/Measure
NPR-E1701 Failed while opening the WLAN device of the computer.
Check that the WLAN function of the computer operates normally.
NPR-E1702 Failed while scanning the access point.
Check that the WLAN function of the computer operates normally.
NPR-E1703 Failed while getting information of the access point. Check the WLAN function of the
computer, and if multiple WLAN networks exist.
NPR-E1704 Cannot find the access point.
Check if devices are connected correctly, the input SSID is correct and the projector is turned
on.
NPR-E1705 Tried but failed while connecting using WEP64 bit or WEP128 bit. Check that the security
setting of the WLAN function of the projector is correct.
NPR-E1706 Tried but failed while connecting using MIX (WPAPSK/WPA2-PSK (TKIP/AES)), WPA2-PSK
(AES). Check that the security setting of the WLAN function of the projector is correct.
NPR-E1707 A security setting other than WEP 64bit, WEP 128bit, MIX (WPAPSK/WPA2-PSK (TKIP/AES)),
WPA2-PSK (AES) is applied. Check that the input SSID and the security setting of the WLAN
function of the projector are correct.
NPR-E1708 Failed to acquire the network profile. Check if the WLAN function of the computer operates
normally.
NPR-E1709 Succeeded in authenticating the access point, but failed while associating. Check if multiple
WLAN networks exist, or if the status of the projector changed while the computer tried to
connect to the projector.
NPR-E1802 Failed while getting the IP address after connecting to the access point. Check the input SSID,
security password and the setting of the security software of the computer.
NPR-E1803 Succeed in connecting to the access point, but failed while getting the information. Check
the setting of the security software of the computer.
NPR-E1804 Connected to a different SSID (access point) from the one you assigned.
Start from the connection setting again.
NPR-E2101 Cannot receive a response from the projector.The response may be blocked or the network
may have been disconnected from the projector while communicating. Check the setting of
the security software of the computer, the power status and the network composition of the
projector.
4
Start the Projector Station for Network Presentation.
For Windows
Double-click the shortcut icon of Projector Station for
Network Presentation that is created in the folder in
which the application is installed.
For Mac
Double click "Projector Station for Network
Presentation" in the folder in which the application is
installed.
Notes
• You can use this application only on the OS that supports
this application.
• Make sure Projector Station for Network Presentation is
not operating before installing the application.
• Make sure the external media that the application will be
installed to has access rights and all files in the external
media are closed.
42
Page
32
32
9, 32
14, 41
41
41
9, 41
–
–
–
–
40
–