Table of Contents
Advertisement
Connecting to the network equipment
Notes
When using network features, be sure to check if "LAN Setting" is set to "via HDBaseT" (page 25).
Connect the projector directly to the HDBaseT transmitter without going through a hub or router.
• Set "Extron XTP" in the Connection/Power menu to "On" when connecting to XTP Systems manufactured by Extron
Electronics (page 25).
When you monitor and control the projector via the network, access the Setup page of the projector (page 34) via a Web
browser and enable the desired control protocol.
To attach the HDMI cable
Fix the cable to the security bar at the bottom of the projector using a commercially-available cable tie, as
in the illustration.
Bottom of the
projector
LAN
terminal
Computer
Wired connection
Computer
Wireless connection
Cable tie (commercially available)
LAN cable (straight type)
(not supplied)
Hub, Wireless router
HDBaseT transmitter
LAN cable: STP type (CAT5e or
higher, straight, not supplied)
12
Security bar
Advertisement
Table of Contents
