Table of Contents
Advertisement
1
Click on [Network] to open the Network page.
LAN Network setting area
Network button
2
Set the items for internet protocol.
Obtain an IP address automatically:
Automatically provides the network settings by a
DHCP server function, such as the router. The IP
Address, Subnet Mask, Default Gateway, Primary DNS,
and Secondary DNS display the values provided by a
DHCP server.
Specify an IP address:
Set the network manually.
-IP Address:
Input the IP address of the projector.
-Subnet Mask:
Input the subnet mask of the projector.
-Default Gateway:
Input the default gateway of the projector.
-Primary DNS:
Input the primary DNS server of the projector.
-Secondary DNS:
Input the secondary DNS server of the projector.
3
Set the items for Ethenet.
MAC Address:
Displays the MAC address of the projector.
Speed:
Select the network speed of the projector.
Setting the WLAN Network of the projector
Set the WLAN network function on the Setup
page.
Entered values will not be applied unless you click
on [Apply].
To use the wireless LAN network, a USB wireless
LAN module IFU-WLM3 (not supplied) is necessary.
1
Click the [WLAN Setting] to open the WLAN Setting
page.
WLAN Setting button
2
Enable or disable the radio wave output of USB
wireless LAN module.
Wireless ON:
Enables radio wave output of USB wireless LAN
module.
Wireless OFF:
Disables radio wave output of USB wireless LAN
module.
WLAN Network:
Set the modes for USB wireless LAN module.
Items
Access Point
Client
3
(a) Input the settings for Access Point Mode.
When the USB wireless LAN module is activated as an
access point, set the items for the access point.
Network Name (SSID):
Input the SSID of the access point if "WLAN Network"
is set to "Access Point" (page 32).
The factory setting is "VPL + the MAC address of the
LAN."
Channel Setting:
Select the channel of the access point if "WLAN
Network" is set to "Access Point" (page 32).
Encryption Type:
Select the security method of the access point from
the followings if "WLAN Network" is set to "Access
Point" (page 32).
Encyption Type
Open
WEP 64bit
WEP 128bit
32
Descriptions
Activates USB wireless LAN
module as an access point. Set
the items for WLAN manually.
Activates USB wireless LAN
module as a client.
Descriptions
Sets the security method of the
access point to open system
authentication.
Sets the security method of the
access point to WEP (64bit).
Sets the security method of the
access point to WEP (128bit).
Advertisement
Table of Contents
